Programming your Norstar systems

Print or Save this Page

The overlay is placed over all of the 8 buttons on the M7208
and on the M7310,M7324 over the top 4 buttons.
 

This one is for the M7208 set

This one is for the M7310 & M7324
M7208 Programming Template M7310 Programming Template

m7310pro.bmp (156654 bytes)

  

Entering Administration for the 308,616 and 824 control units.

Administration is for (Time & Date,Speed Dial,Names,Capabilities,)
Administration access code: Feature * * 2 3 6 4 6 which also is Feature * * A D M I N.  If asked for a password enter the same 2 3 6 4 6.   To get out of programming,  just press the release button (RLs).     Programming is easier using the M7310 set. 
For the ICS and 0x32 control unit
Feature * * 2 6 6 3 4 4 which is C O N F I G. Password is 2 3 6 4 6 which is A D M I N.
When in programming just press the (next) button until you see what you want to change. Then press (show),then (change) if you want to change it. If you pass it,  just press (back)
Example: To change the Time & Date     Press (next) until you see Time & Date. Then (show) Then  (change) Then (change) again,  change it if you need to,   Then (next) again until you see what you need to change. For example; only the hour  needs to be changed  for day light savings time. Just press (next) until you come to the (Hour).   Then Change it.      Then press release (RLs) when your done.

System Programming

System Programming is for (Configuration,Trunk/Line Data,Line Access,Call Handling)
Enter Feature * * 2 6 6 3 4 4 which is also Feature * * C O N F I G. PASSWORD is * * 2 6 6 3 4 4
Be Careful in System Programming. Take your time and look at the display. When the word (SET) shows up it's asking what extension number than you want to program. Enter the extension number.  When you see something that you need to change press (SHOW) then (Change) then (NEXT).
We hope this will help you by not having to call in a service technician to make simple changes on your Norstar system.
Feature Code Quick Reference
All the Feature with out the * can be programmed to a button using Feature * 3
FEATURE * 0 BUTTON INQUIRY    ( FOR BUTTONS THAT AREN'T MARKED)
FEATURE * 1 PROGRAMMING OUTSIDE AUTODIAL ONTO A MEMORY BUTTON
FEATURE * 2 PROGRAMMING INSIDE AUTODIAL ONTO A MEMORY BUTTON
FEATURE * 3 PROGRAMMING A FEATURE TO A MEMORY BUTTON
FEATURE * 4 PROGRAMMING PERSONAL SPEED DIAL
FEATURE * 501 ENGLISH LANGUAGE
FEATURE * 502 ALTERNATE LANGUAGE
FEATURE * 6 RING TYPE
FEATURE * 7 CONTRAST ADJUSTMENT (ON THE LCD DISPLAY)
FEATURE * 80 RING VOLUME ADJUSTMENT
FEATURE 0 SPEED DIAL
FEATURE 1 SEND MESSAGE                (TO CANCEL PRESS FEATURE # 1)
FEATURE 2 RING AGAIN                      (TO CANCEL PRESS FEATURE # 2)
FEATURE 3 CONFERENCE
FEATURE 4 CALL FORWARD  TO ANOTHER EXTENSION (TO CANCEL PRESS FEATURE # 4)
FEATURE 5 LAST NUMBER REDIAL
FEATURE 60 PAGE GENERAL
FEATURE 61 PAGE TO INTERNAL PAGE ZONE
FEATURE 62 PAGE EXTERNAL
FEATURE 63 PAGE TO A PAGE ZONE AND EXTERNAL PAGE
FEATURE 64 LINE POOL  (TO PROGRAM A LINE POOL TO A BUTTON)
FEATURE 65 REPLY TO MESSAGE        (TO CANCEL PRESS FEATURE # 65)
FEATURE 66 VOICE CALL     (TO PAGE 1 EXTENSION)
FEATURE 67 SAVE NUMBER REDIAL
FEATURE 69 PRIORITY CALL
FEATURE 70 TRANSFER
FEATURE 71 LINK (FLASH)
FEATURE 72 TIMED RELEASE
FEATURE 74 CALL PARK
FEATURE 75 CALL PICKUP
FEATURE 77 CALL DURATION TIMER
FEATURE 79 EXCLUSIVE HOLD
FEATURE 85 DO NOT DISTURB              (TO CANCEL PRESS FEATURE # 85)
FEATURE 86 BACKGROUND MUSIC    (TO CANCEL PRESS FEATURE # 86)
FEATURE 87 NIGHT SERVICE                 (TO CANCEL PRESS FEATURE # 87)
FEATURE 88 VOICE CALL DENY            (TO CANCEL PRESS FEATURE # 88)

Voice Mail Feature Codes
FEATURE 980 TO LEAVE A MESSAGE IN ANOTHER MAIL BOX
FEATURE 981 TO OPEN YOUR MAIL BOX (DEFAULT PASSWORD 0 0 0 0)
FEATURE 982 OPERATOR STATUS
FEATURE 983 SYSTEM ADMINISTRATION
FEATURE 985 EXTENSION NUMBER VOICE MAIL IS USING
FEATURE 986 TO TRANSFER A CALL TO ANOTHER MAIL BOX
FEATURE 987 TO INERRUPT A CALLER IN YOUR MAIL BOX